除濕機翅片結冰了怎么辦？
除濕機現在已經逐漸在大眾人群中普及了，在北方的冬季和南方的梅雨季節除濕機是人們經常用于家庭和工廠除濕的設備。然而在一些寒冷的時候，除濕機會經常結冰，影響使用。那么除濕機結冰的原理和解決措施是什么呢？小編在這里給大家講下吧。
Dehumidifier is now gradually popular in the public, in the winter of the north and the plum rain season in the south, dehumidifier is often used for household and factory dehumidification equipment. However, in some cold times, dehumidifier often freezes, affecting the use. So what is the principle and solution of dehumidifier icing? Let's talk about it here.
在使用除濕機的時候難免會遇到這樣那樣的問題以及故障，那么大家在使用除濕機時遇到除濕機兩器結霜結冰的情況，應該如何處理呢，我們一起來看一下。
When using the dehumidifier, it is inevitable to encounter such and other problems and failures. Then, when using the dehumidifier, we encounter the situation of frosting and icing on the two dehumidifiers. How to deal with them? Let's have a look.
在正常的使用情況，除濕機有結霜現象是正常的，特別是在低溫下使用時，更是種常見的現象，當除濕機兩器上結霜過多時，會降低除濕效果，所以現在除濕機都配有自動電子化霜功能，當進入化霜程序時，壓縮機是不啟動的，只有風機在轉，所以沒有除濕效果，也很省電，就相當于一個風扇在轉。待化霜結整后，除濕機恢復工作，這個過程大根需要十幾分鐘到半個小時左右。所以當在冷庫內使用時，由于室內溫度過低，除濕機就特別容易結霜甚至結冰，這就使除濕機的化霜時間增加，除濕時間減少，除濕的效果受到影響。
In normal use, it is normal for the dehumidifier to have frosting, especially when it is used at low temperature. When there is too much frost on the two dehumidifiers, the dehumidification effect will be reduced. Therefore, the dehumidifiers are equipped with automatic electronic defrosting function. When entering the defrosting program, the compressor does not start, only the fan is running, so there is no dehumidification effect, It also saves electricity, which is equivalent to a fan running. After defrosting, the dehumidifier will return to work. This process takes about ten minutes to half an hour. Therefore, when it is used in the cold storage, the dehumidifier is particularly prone to frosting or even icing due to the low indoor temperature, which will increase the defrosting time of the dehumidifier, reduce the dehumidification time, and affect the dehumidification effect.
所以當我們遇到除濕機翅片結冰時應先確認下機器是不是有自動化霜功能，現在一般的除濕機都有這個功能，結冰原因有三，1、溫度傳感器壞了。出現這種情況時，自動化霜功能就會失效。第二，壓縮機露弗了，出現這種情況也會使翅片結冰。第三，室內的溫度是不是過低，如果在低溫下使用如冷庫內，就算機器都正常，由于室內溫度過低使用不了多長時間也會出現這種情況。所以你可以根據這幾種原因來排除倒底問題出在哪了。
Therefore, when we encounter the dehumidifier fin freezing, we should first confirm whether the machine has automatic frost function. Now the general dehumidifier has this function. There are three reasons for freezing: 1. The temperature sensor is broken. When this happens, the automatic frost function will fail. Second, the compressor luff, this situation will also make the fins freeze. Third, whether the indoor temperature is too low. If it is used at low temperature, such as in the cold storage, even if the machines are normal, because the indoor temperature is too low, it will not be used for long. So you can rule out the bottom problem according to these reasons.
